Schneider HLL26080 powerpact molded case circuit breakerSchneider HLL26080 powerpact molded case circuit breaker Schneider HLL26080 powerpact molded case circuit breaker-circuit breakers,potentiometers,contactor
Home > Products > Fuse > Schneider fuse > Schneider HLL26080 powerpact molded case circuit breaker

Schneider HLL26080 powerpact molded case circuit breaker

share

FEATURES




  • The CMU Power Fuse interrupts at a natural current zero in the current wave and allows a minimum of a half cycle of fault current to flow before the fault is cleared. The time-current characteristics associated with a CMU Power Fuse have a gradual slope, making it easier to coordinate with downstream equipment.

  • The CMU Power Fuse is ideal for higher voltage (up to 38 kV) and high current applications (through 200 A). Proper coordination can be achieved through use of the appropriate timecurrent curves. 

  • The CMU Power Fuse provides effective protection for circuits and equipment which operates on voltages from 2,400 V to 34,500 V.

  • The CMU Power Fuse has interrupting capabilities from 10,000 to 14,000 A symmetrical.

  • The CMU Power Fuse is offered in three configuration for use with high currents: “E” (standard), “K” (fast), and “SE” (slow). The curves for the “SE” are less inverse and allow for more of a time delay at high currents.

  • CMU Power Fuses, when used on the transformer-primary side, should be selected based on the anticipated normal transformer loading schedule, including daily or repetitive peak loads, and must be sized with the inrush currents in mind.


Schneider UL489C60195 miniature circuit breaker

Schneider UL489C60195 miniature circuit breaker


Features: RoHS compliant, lead-free, and halogen-free Fast response to fault currents Compact design saves board space Low resistance Low-profile Compatible with high temperature solders
Schneider BJL46125 powerpact molded case circuit breaker

Schneider BJL46125 powerpact molded case circuit breaker


AG Fuses Originally stood for “all glass.” The automotive industry uses the “AG” prefix (AGC, AGW) for most glass fuses. They vary in length, diameter and amperage rating. Voltage Rating: 32V AC/DC
Schneider UL489C60278 miniature circuit breaker

Schneider UL489C60278 miniature circuit breaker


Features: Broadest range of resettable devices available in industry Low resistanceBenefits:Compact Design and New HV Ratings Smaller size helps reduce board space and cost Many product choices optimizes design flexibility Compatible with high-volume electronics assembly Higher voltage ratings allow
Schneider NW12NDC masterpact DC circuit breaker

Schneider NW12NDC masterpact DC circuit breaker


SpecificationsAmp Range – 80mA to 6.3AWave Solder Process – 260°C, 10 Sec., max.Multiple Safety Agency ApprovalsOperating Temperature: -55°C to +125°CMil-Std 202G Environmental CompliantDesign FeaturesCompact, round or rectangular bodywith 5mm Pin Spacing94V-0 Thermoplastic H
Schneider QBL22225 molded case circuit breaker

Schneider QBL22225 molded case circuit breaker


Electrical Characteristic:Operating/Storage Temperature -40°C to +85°CMaximum Device Surface Temperature In Tripped State 125°CPassive Aging +85°C, 1000Hours, ±5% Typical Resistance ChangeHumidity Aging +85°C, 85%R.H., 168Hours, ±5% Typical Resistance ChangeThermal
Schneider HU363DSEIVW heavy duty safety switch

Schneider HU363DSEIVW heavy duty safety switch


FEATURES Voltage ratings of up to 38kV coupled with ratings to 200A provide a wide range of circuit protection Time-current characteristics allow for easier coordination with downstream devices Provides replacement of a variety of existing systems
Schneider QO315SWN circuit breaker

Schneider QO315SWN circuit breaker


Features■ Axial leaded■ Fully compatible with current industry standards■ Weldable nickel terminals■ Very low internal resistance■ Operating currents to 9.0 amps■ RoHS compliant
Schneider HGL26020 powerpact molded case circuit breaker

Schneider HGL26020 powerpact molded case circuit breaker


FEATURES The fuses’ current-limiting capability limits both peak current magnitude and fault duration, thus limiting the total I2t let-through energy. The fuses have ferrules for mounting in standard spring-reinforced clips, providing interchangeability with other brands of fuses. Equipped wit
Schneider LDL36250U33X molded case circuit breaker

Schneider LDL36250U33X molded case circuit breaker


Specifications Description: Indoor/enclosure R-Rated medium voltage, current-limiting fuse links for motor circuit protection. Ratings: Rated Voltage: 2.4 - 7.2kV Rated Current: 25 - 450A Breaking Capacity: 50kA Sym
Schneider BJL46030 powerpact molded case circuit breaker

Schneider BJL46030 powerpact molded case circuit breaker


AG Fuses Originally stood for “all glass.” The automotive industry uses the “AG” prefix (AGC, AGW) for most glass fuses. They vary in length, diameter and amperage rating. Voltage Rating: 32V AC/DC
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 133.9 ms